Belt Tension Meter T-ACE
- A sonic belt tension meter that measures the initial tension of a belt
- Controlling the initial tension of a belt is very important for it to demonstrate full performance.
- T-ACE measures frequencies between 10 and 5000 Hz and can be used in a wide range of layouts.
Features and Principle
The belt tension meter captures the sound waves generated by the amplitude of the belt with a mic. The frequency is then sent to a microcomputer, which then digitally displays load.
Belt Tension Meter T-ACE Features
- ・Organic EL screen with bright and easy-to-see characters
- ・40 measurement conditions can be registered
- ・Wide frequency range of 10 to 5000 Hz can be measured.
- ・Unit mass of Tsubaki synchronous belt has already been entered.
Catalogs ・Instruction Manuals
Major Specifications
Measuring range | 10.0Hz~5000Hz、0.01~99900N(Display range ) |
---|---|
Span length | 1mm~9999mm (Display range ) |
Unit mass | 0.1g/mm×m~999.9g/mm×m(Display range ) |
Operating Temperature / Humidity | -10~50℃、80%以下(No condensation ) |
Power Supply | AAA dry cell batteries (2) |
Mass/dimensions | 120g(Main unit only )、Length 160×Width 59×Thickness 26mm |
Accessories | Sensor microphone ・Dry cell batteries (AAA dry cell batteries (2) )・Soft case for carrying ・ Instruction Manuals ・Operation Instruction (For carrying )・Warranty ・Inspection certificate |
・Depending on the combination of measuring conditions, the oscillation frequency can sometimes be out of measurable range even if the initial tension is appropriate.
(Care should be taken when the span is longer than 1m. )
・A cord-type sensor microphone option is available. (Cable length: 1m)
Standard prices and delivery time
Model No. | Standard Price | Delivery |
---|---|---|
BDTM201 | Contact us for details. | Contact us for details. |