Sprockets for RS Chains with Outboard Rollers
- Special sprockets for RS Chain with Outboard Rollers
- Outboard Roller RS Chain may cause interference between outboard rollers and sprocket hubs, depending on the number of sprocket teeth. Use this special sprocket instead.
Features
- *Uses carbon steel for machine structural use, and have hardened teeth.
- *Available chain sizes :RS40~RS100
Note) When selecting sprocket specifications
・It is necessary to select a sprocket specification that corresponds to the customer's operating environment and the chain specification used. For details, please refer to the compatibility table for each chain and sprocket.
・Shaft bore remains as a pilot bore, so it must be machined by the customer before use. If you require a product with a finished bore or keyless locking, please contact us as this will be made-to-order product.
Catalogs ・Instruction Manuals
Model No. examples
RS40 | - | 1 | B | 21T | Q | - | SR |
| Size |
| No. of strands |
| Hub Type |
| Number of teeth |
| Tooth hardening | | For outboard rollers |
||
List of Models
※Click the name for more information.
Applicable chain no. | Base Model No. | Working number of teeth range |
---|---|---|
RS40 | RS40-1B□TQ-SR | 9~23 |
RS50 | RS50-1B□TQ-SR | 9~18 |
RS60 | RS60-1B□TQ-SR | 9~13 |
RS80 | RS80-1B□TQ-SR | 9~15 |
RS100 | RS100-1B□TQ-SR | 10~12 |