Hypoid Motor TA/TR Series
- Right-angle hypoid gear reducer.
- TA series (0.1 - 0.4kW) use aluminum frame motors and silent brakes, and achieve compact, lightweight, and quiet operations.
- TR series (0.75 - 5.5kW) is compatible with High Efficiency motors. (Premium Efficiency : IE3 )
Features
-
・High Efficiency
Less sliding and greater efficiency compared to a worm gear. At the same output, there is less power consumption and greater cost effectiveness.
-
・Low Noise
Tsubaki’s know-how in gear motor processing technology ensures low noise and high reliability.
-
・Usability
The grease is already encapsulated so it’s ready to use. It can be installed in any direction.
Tap processing is standard on the output shaft edges. For the hollow type shaft, the torque arm and shaft edge cover are available as options.
-
・With inverter motor (0.1kW to 0.4kW only)
The inverter-compatible motor can be directly connected, and the dimensions are exactly the same as those of thestandard model. Even in the low frequency range (6 Hz and more), continuous operation at 100% constant torque is possible.
Equipped with a High Efficiency motor of 0.75kW or more has the same characteristics as those with inverter motor.
-
・Compact
Particular emphasis on the height dimension, this reducer is extremely short and compact.
Mounting pitch <a> is same.
-
・Compatible with Overseas High Efficiency Regulations (TR series)
With a growing global awareness of energy savings, legal regulations are being introduced around the world that require the manufacture and sales of high efficiency motors.
Tsubaki's TR Series Small-Size Gear Motors are compatible with overseas high efficiency regulations as well as domestic Japanese regulations. We provide high-quality products that meet ever-changing needs.
[Compatibility Table for Overseas Standards ]
Please contact us for more information on specification. Motor Capacity 0.2kW 0.4kW 0.75kW 1.5kW 2.2kW 3.7kW 5.5kW No brake With brake No brake With brake No brake With brake No brake With brake No brake With brake No brake With brake No brake With brake Chinese High Efficiency Regulations
GB18613-2020√ √ √ √ √ √ √ √ √ √ √ √ √ √ European High Efficiency Regulations
IEC60034-30-1(2017)
※1√ √ √ √ √ √ √ √ √ √ √ √ √ √ Korean High Efficiency Regulations
KS C 4202Not applicable √ √ √ √ √ √ √ √ √ √ U.S. High Efficiency Regulations
MEMA MG1-12-12Not applicable √ √ √ √ √ √ √ √ √ √
Standard models
・TA Series (Equivalent to IE1 )
Motor Capacity | Reduction ratio |
---|---|
0.1kW | 1/5~1/1200 |
0.2kW | 1/5~1/1200 |
0.4kW | 1/5~1/1200 |
・TR Series (Equivalent to IE3 )
Motor Capacity | Reduction ratio |
---|---|
0.75kW | 1/5~1/480 |
1.5kW | 1/5~1/200 |
2.2kW | 1/5~1/120 |
3.7kW | 1/5~1/60 |
5.5kW | 1/5~1/40 |
Construction (Triple-Reduction Hollow Shaft Type )
Catalogs ・Instruction Manuals
Model No. examples
・With a three-phase motor :0.1kW~0.4kW | |||||||
HMTA | 010 | - | 38 | L | 1200 | L | B |
・With a three-phase motor :0.75kW~5.5kW | |||||||
HMTR | 075 | - | 42 | U | 200 | S | B |
| | | | | |
| Motor Capacity |
| Frame number |
| Mounting type |
| Reduction ratio |
| | | | | |
| Package symbol |
|
010:0.1kW | H:Hollow Shaft Type U:Face Mount Type L:Foot Mount Type |
1200:1/1200 | B:With a brake FI:With adapter |
||||
Series HMTA, HMTR:With a three-phase motor HRTA:Double shaft type with adapter |
Shaft Arrangement L:Looking from the motor, the output shaft on the left. T:Output shaft is on both sides. R:Looking from the motor, the output shaft on the right. S:Single output shaft (on the face, Face-mount models only ) No symbol :Hollow Shaft Type |
We have a lot of options. Please check here for the types and model numbers of options.
■ Tsubaki model No. navigation
Series
HMTA:This type is supplied with a three-phase motor.
HMTR:This type is supplied with a three-phase high efficiency motor.
HRTA:The gear reducer without a motor is available with a double output shaft or with an adapter for mounting a multipurpose flange motor.
Motor Capacity
For the HMTA or HMTR: this is the motor capacity.
For the HRTA: this indicates the equivalent capacity of the motor.
Frame number
This indicates the size of the gear reducer. For most models, this is the same value as the output shaft diameter.
This is automatically determined by the motor capacity and reduction ratio.
Mounting type
H:The output shaft is hollow.
U:The output shaft is solid, and the unit is designed for face mounting.
L:The output shaft is solid, and the unit is designed for foot mounting.
Reduction ratio
This indicates the reduction ratio.
The range is separated into sections that correspond to the frame number.
Shaft Arrangement
L:On this type, the mounting code is for feet mounts (L), and the solid output shaft protrudes to the left side.
R:On this type, the mounting code is for feet mounts (L), and the solid output shaft protrudes to the right side.
T:The solid output shaft protrudes on both sides.
S:On this type, the mounting code is for face mount (U), and the solid output shaft protrudes on the mounting surface side.
No symbol: leave the shaft arrangement symbol blank if you specify hollow type (H) for the mounting code.
Package symbol
No symbol: Leave the package symbol blank for a reducer with a motor and no brake, or a reducer without a motor but with a double shaft.
B:For a reducer with a motor, add to select a motor with a brake.
FI:For a reducer without a motor, add if the reducer should have an adapter for mounting a motor.
K:On this type, the output shaft is a hollow shaft and a Power-Lock will be mounted to the driven machine shaft.
BE:A rotary encoder will be mounted to the rear of the motor. This specifies a motor with a brake.
SR:This specifies a motor with a Shock Relay, an electronic overload protection device.
Option symbol A
Z:This specifies a motor that can be used with a variable frequency drive.
W:This specifies a motor suitable for outdoor installation.
WC:This specifies a motor with a brake with a continuous rating for outdoor use.
P:This specifies a plastic terminal box.
J:This specifies a motor suitable for installation in areas subject to water.
V:This specifies the power supply voltage will be doubled.
V1:This specifies a power supply voltage and cycle rating of 380VAC, and 50Hz.
V2:This specifies a power supply voltage and cycle rating of 380VAC, and 60Hz.
V3:This specifies a power supply voltage and cycle rating of 415VAC, and 50Hz.
V4:This specifies a power supply voltage and cycle rating of 460VAC, and 60Hz.
N:This specifies compliance with the CE marking directives.
N2:This specifies compliance with UL standards.
*N3:This specifies CCC compliance.
H:This specifies an aluminum terminal box.
Q:The brake can be manually disengaged.
M:The motor can be turned manually from the fan side.
A1:This specifies an ambient operating temperature range from 0 to 60℃.
A2:This specifies an ambient operating temperature range from -30 to 40℃.
Option symbol B [Old:Supplement code]
・Terminal box position
The terminal box will be relocated to a position clockwise looking from the motor.
P1:90゚Offset P2:180゚Offset P3:270゚Offset
・Direction of terminal box wiring outlet.
The wiring outlet on the terminal box will be relocated to a position clockwise looking at the terminal box.
・HMTA For motor capacities of 0.75 kW or less.
D1:90゚Offset D2:180゚Offset D3:270゚Offset
・HMTA For motor capacities of 1.5 kW or more.
E1:90゚Offset E2:180゚Offset E3:270゚Offset
・For the HMTR
F1:90゚Offset F2:180゚Offset F3:270゚Offset
・Paint Color
C0:Light silver C1:Light silver metallic
C2:Ivory white C3:Dark silver metallic
・Hollow shaft bore diameter
S1:Φ20 S2:Φ25 S3:Φ30 S4:Φ35
S5:Φ40 S6:Φ45 S7:Φ50
List of Models
※Click the model No. for detailed information. Expand all Collapse all
With motor 3 Phase 0.1kW (Model No. HMTA010~)
With motor 3 Phase 0.2kW (Model No. HMTA020~)
With motor 3 Phase 0.4kW (Model No. HMTA040~)
With motor 3 Phase 0.75kW (Model No. HMTR075~)
With motor 3 Phase 1.5kW (Model No. HMTR150~)
With motor 3 Phase 2.2kW (Model No. HMTR220~)
With motor 3 Phase 3.7kW (Model No. HMTR370~)
With motor 3 Phase 5.5kW (Model No. HMTR550~)
Without a motor With adapter ・Double shaft type 0.1kW equivalent (Model No. HRTA010~)
Without a motor With adapter ・Double shaft type 0.2kW equivalent (Model No. HRTA020~)
Without a motor With adapter ・Double shaft type 0.4kW equivalent (Model No. HRTA040~)
Without a motor With adapter ・Double shaft type 0.75kW equivalent (Model No. HRTA075~)
Without a motor With adapter ・Double shaft type 1.5kW equivalent (Model No. HRTA150~)
Options
Shaft cover
・A cover is available for models with a hollow shaft. This cover protects the end of the hollow shaft opposite the mounting side. Also fits shafts with an adapter and double output shafts.(Material: polypropylene; Color: green)
・Size (Unit: mm), PDF drawings
Model No. | Motor capacity, reduction ratio | PDF drawing | Standard Price | Delivery |
---|---|---|---|---|
HM70CAP | 0.1kW 1/5~1/120 0.2kW 1/5~1/60 |
PDF For standard model and with Power-Lock type | Contact us for details. | Contact us for details. |
HM90CAP | 0.1kW 1/160~1/1200 0.2kW 1/80~1200 0.4kW 1/5~1/480 0.75kW 1/5~1/200 1.5kW 1/5~1/80 2.2kW 1/5~1/60 |
PDF For standard model | Contact us for details. | Contact us for details. |
HM140CAP | 0.4kW 1/600~1/1200 0.75kW 1/300~1/480 1.5kW 1/100~1/200 2.2kW 1/80~1/120 3.7kW 1/5~1/60 5.5kW 1/5~40 |
PDF For standard model | Contact us for details. | Contact us for details. |
HM90CAP-PL | 0.1kW 1/160~1/200 0.2kW 1/80~1/200 0.4kW 1/5~1/200 0.75kW 1/5~1/50 |
PDF For standard model and with Power-Lock type | Contact us for details. | Contact us for details. |
Torque Arm
・A torque arm is available for hollow shaft models that are to be shaft mounted. Also fits shafts with an adapter and double output shafts. (Material: SS400)
Mounts in either position, depending on how the gear reducer is mounted.
・Size (Unit: mm), PDF drawings
Model No. | Motor capacity, reduction ratio | A | B | C | D | H | L | R1 | R2 | R3 | ΦZ1 | ΦZ2 | Recommended bolts | Thickness: t |
PDF drawing | Standard Price | Delivery |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HM100TA | 60W 1/5~1/240 90W 1/5~1/240 0.1kW 1/5~1/120 0.2kW 1/5~1/60 |
100 | 62 | 38 | 70 | 82 | 126 | 9 | 11 | 37 | 9 | 11 | M10 | 4.5 | Contact us for details. | Contact us for details. | |
HM150TA | 0.1kW 1/160~1/480 0.2kW 1/80~200 0.4kW 1/5~1/50 |
150 | 103 | 47 | 88 | 129 | 157 | 11 | 15 | 47 | 11 | 13 | M12 | 6 | Contact us for details. | Contact us for details. | |
HM200TA | 0.1kW 1/600~1/1200 0.2kW 1/300~1/480 0.4kW 1/60~1/200 0.75kW 1/5~1/50 |
200 | 142 | 58 | 106 | 171 | 188 | 12 | 17 | 47 | 13 | 17 | M16 | 6 | Contact us for details. | Contact us for details. | |
HM250TA | 0.2kW 1/600~1/1200 0.4kW 1/300~1/480 0.75kW 1/60~1/200 1.5kW 1/5~1/80 2.2kW 1/5~1/60 |
250 | 177 | 73 | 123 | 214 | 228 | 16 | 21 | ― | 17 | 21 | M20 | 9 | Contact us for details. | Contact us for details. | |
HM350TA | 0.4kW 1/600~1/1200 0.75kW 1/300~1/480 1.5kW 1/100~1/200 2.2kW 1/80~1/120 3.7kW 1/5~1/60 5.5kW 1/5~1/40 |
350 | 245 | 105 | 182 | 293 | 331 | 22 | 26 | ― | 22 | 22 | M20 | 9 | Contact us for details. | Contact us for details. |