Conveyor Chain for Water Treatment Plants BF Type
- This drive chain uses tempered stainless steel for increased wear and corrosion resistance.
- SUS300 series stainless steel also available.
- Roller chain sprockets can be used as is.
- Bushed type chain.
Catalogs ・Instruction Manuals
List of Models
※Click to see detailed information.
※Maximum allowable load is a value calculated based on Tsubaki in-house standards and is calculated strength. As long as there are no other constraints, maximum allowable load is used in selecting large size conveyor chain.
This value will differ by manufacturer and is not a guaranteed value.
※Contact a Tsubaki representative regarding average tensile strength.
Size | Pitch | Bush diameter |
Inner width of inner link |
---|---|---|---|
Φmm | mm | ||
BF120N | 38.1 | 22.23 | 25.4 |
BF140 | 44.45 | 25.4 | 25.4 |
BF140E | |||
BF160 | 50.8 | 28.58 | 31.7 |
BF160E | |||
BF200 | 63.5 | 39.69 | 38.1 |
BF200E | |||
BF240 | 76.2 | 47.62 | 47.6 |
ACS4124 | 103.2 | 43.7 | 37 |
BF2120 | 76.2 | 22.23 | 26 |