Power-Lock TF Series
- Suitable for small hub applications with the small inner-to-outer diameter ratio.
- ・Designed to fit small hub diameters with the smallest available inner-to-outer diameter ratio of our Power Lock series.
- ・Minimum number of locking bolts used, enabling reduced installation time.
- ※With self-centering function. No need for the hassle of machining on hubs for guide portions.
- ※There is no hub movement when assembling.
Standard package
- ・Constructed of the following four parts: inner and outer rings, a spacer and locking bolts.
- ・Many manufacturers are available both domestically and abroad, and this series is highly compatible.
- Applicable shaft diameter :Φ6~Φ90
- Torque range :11~8820N・m
- Applicable tolerance :Shaft :h8 Hub hole :H8
- Applicable surface roughness :Ra1.6
Electroless nickel plated
- ・The units are plated with peel-proof electroless nickel.
- ・The locking bolts have a special surface treatment with lubricating effect, so no additional lubrication is necessary during assembly.
- ・Dimensions and transmissible torque are the same as the standard TF models. No torque reduction.
- ・Small inner and outer diameter ratios, available from Φ10, are ideal for small-diameter hubs as in the standard series.
- Applicable shaft diameter :Φ10~Φ90
- Torque range :44~8820N・m
- Applicable tolerance :Shaft :h8 Hub hole :H8
- Applicable surface roughness :Ra1.6
Construction
Single taper
・"Power-Lock" TF Series shaft-hub locking devices are simply constructed of the following four parts: inner and outer rings, a spacer and locking bolts. Simply tighten these bolts to achieve a completely secure connection.
Handling method
Catalogs ・Instruction Manuals
Model No. examples
PL | 010 | X | 018 | TF | - | KP |
| Shaft diameter |
| Outer Diameter |
| Series |
| Package |
|||
Blank: Standard type KP:Electroless nickel plated |
List of Models
※Click the name for more information.