Deep Link Conveyor Chain
- Wide link plates and R rollers with low frictional resistance are added to a base conveyor chain to allow for direct conveyance of heavy loads on the plates.
- Available with Bearing Roller Conveyor Chain R rollers and top plates as well.
- Base conveyor chain is available in any series.
Application
- ・Sheet or shaped steel conveyor lines at steelworks
- ・Automotive assembly lines, container assembly lines, etc.
Catalogs ・Instruction Manuals
List of Models
※Click to see detailed information.
※Maximum allowable load is a value calculated based on Tsubaki in-house standards and is calculated strength. As long as there are no other constraints, maximum allowable load is used in selecting large size conveyor chain.
This value will differ by manufacturer and is not a guaranteed value.
※Contact a Tsubaki representative regarding average tensile strength.
Size | Roller type |
Pitch | Roller diameter |
Inner width of inner link |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
75mm | 100mm | 150mm | 152.4mm | 200mm | 250mm | 300mm | 400mm | 450mm | Φmm | mm | ||
RF03 | R | RF03075R-DL□ | RF03100R-DL□ | --- | --- | --- | --- | --- | --- | --- | 31.8 | 16.1 |
RF05 | R | --- | RF05100R-DL□ | RF05150R-DL□ | --- | --- | --- | --- | --- | --- | 40 | 22 |
RF08 | R | --- | --- | RF08150R-DL□ | --- | --- | --- | --- | --- | --- | 44.5 | 27 |
RF10 | R | --- | --- | RF10150R-DL□ | --- | RF10200R-DL□ | --- | --- | --- | --- | 50.8 | 30 |
RF6205 | R | --- | --- | --- | RF6205R-DL□ | --- | --- | --- | --- | --- | 57.2 | 37.1 |
RF12 | R | --- | --- | --- | --- | RF12200R-DL□ | RF12250R-DL□ | --- | --- | --- | 65 | 37.1 |
RF17 | R | --- | --- | --- | --- | --- | RF17250R-DL□ | RF17300R-DL□ | --- | --- | 80 | 51.4 |
RF26 | R | --- | --- | --- | --- | --- | --- | RF26300R-DL□ | --- | --- | 85* | 57.2 |
RF36 | R | --- | --- | --- | --- | --- | --- | RF36300R-DL□ | RF36400R-DL□ | --- | 100* | 66.7 |
RF52 | R | --- | --- | --- | --- | --- | --- | --- | --- | RF52450R-DL□ | 110* | 77 |
Roller diameter marked with * is different from that of RF type conveyor chain, so it is a dedicated sprocket.
□ in the table is a specification symbol of a base chain. (Example: Deep link conveyor chain AT specification → DLAT) Back to top