Plastic Series  Open type  TKR Series

Product photo
  • Cable carrier with lower dust generation than TKQ series.
  • ・Achieves cleanliness ISO class 3. (From our in-house test results )
  • ・Contributes to the reduction of environmental load by low noise and low dust generation.
  • ・Special series such as dry environment types (corresponding to low humidity environment) are available.

Features

Low debris generation, low noise and low vibration thanks to Tsubaki’s original bending structure

1.Generates less wear debris

No sliding wear between pins and pin holes, and the use of highly wear resistant material with high slidability minimize debris generation.

TKR20H28

TKR20H28

TKP35H32

TKP35H32

■Comparison of debris generation

Comparison of debris generation

In-house test conditions

・Installation :Standard arrangement (with floor )

・Travel speed :120m/min ※Supports :None

Note) Debris generated indicates the number of particles 0.1 μm or larger that exist in one cubic foot.

2.Low Noise

Unique bending mechanism utilizing a short pitch and plastic deflection ensures low noise.

■Bent state

TKR20H28

TKR Series

TKP35H32

TKP Series

3.Low vibration

Bending close to an arc ensures smooth low-vibration running.

■Comparison of noise

Comparison of noise

In-house test conditions

・Installation :Standard arrangement (with floor )

・Noise measurement distance :500mm

・Travel speed :100m/min

4.Supports multi-layered division

Storage space can be divided into multiple layers, increasing the flexibility of layout.

DSA type

DSA type

DSB type

DSB type

※2 or more vertical dividers are required.

Guidance

About installation of support rollers

TKR series can be used for even longer strokes by installing support rollers.

Install support roller using the contents of link below as a guide, and use it within the load diagram when the support roller is installed.

TKR37H28

Lightest in similar size conditions

Without any reduction in strength, cable carrier base chain pitch and shape have been changed to achieve a weight reduction of approximately 25%.

Model No. TKR37H28 TKR20H28 Other companies similar specifications Other companies similar lightweight specifications
Mass (mm) 75% 100% 106% 82%
Lightest in similar size conditions

Long life and high rigidity

1.By improving the deflection structure, bending stresses are reduced by 30%, resulting in a longer service life.

2.By improving the stopper structure, it becomes difficult to detach, and the rigidity during unsupported length holding has been increased.

Long life and high rigidity
[Click to enlarge ]

Enhanced protection of cables/hoses

Improved inner surface shape that prevents damage from being applied to cable/hose.

Enhanced protection of cables/hoses
[Click to enlarge ]

Special specifications

Catalogs ・Instruction Manuals

List of Models

※Click the name for more information. Expand all Collapse all

Maximum outer diameter of cable/hose 18mm, 20mm (TKR15H22~)

Maximum outer diameter of cable/hose 25mm (TKR20H28~)

Maximum outer diameter of cable/hose 25mm (TKR37H28~)

Maximum outer diameter of cable/hose 36mm (TKR26H40~)

Maximum outer diameter of cable/hose 45mm, 47mm (TKR28H52~)